Japan Stone Crusher

The crusher stone is a heavy vehicle machine used to reduce large rocks into smaller rocks, gravel, or rock dust, Crushers may be used to reduce the size, or change the form of stones, and waste materials, so it can be easily disposed of or recycled or reduce the size of a solid mix of raw materials, so that pieces of different composition can be differentiated. Crushing is the process of transferring a force increase by mechanical advantage through a material made of molecules that bond together more strongly, and oppose bend more, than those in the material is being crushed do. 

Crushing devices hold material between two parallel or tangent solid surfaces and apply sufficient force to bring the surfaces together to produce more energy within the material being crushed so that its particles divide from (fracturing), or change position associated to (deformation), each other. The earliest crushers were hand-held stones, where the weight of the stone provided a boost to muscle power, used against a stone stake. Edgestone and mortars are types of these crushing devices.

Japanese Automaker: In Japan, there is some popular automaker manufacturer of heavy vehicles such as KOMATSU, KUBOTA, KATO, TADANO, SAKAI, KOBELCO, IHI and YANMAR etc.

History: The superior part of crushing and mining part of the procedure held under the muscle power as the application of force intense in the tip of the miners pick or sledgehammer driven drill small piece. Before explosives came into prevalent use in huge mining in the mid-19th century, most initial ore crushing and sizing was by hand and hammers at the mine or by water mechanical trip hammers in the small charcoal fired smithies and iron works typical of the Renaissance through the early-to-middle industrial revolution. It was only after unstable, and later early powerful steam shovels generate large pieces of materials, chunks originally reduced by hammering in the mine before being loaded into sacks for a trip to the surface, chunks that were eventually also to lead to rails and mine railways transporting bulk aggregations that post-mine face crushing became widely necessary. Larger operations became the coal breakers that fueled industrial growth from the first decade of the 1600s to the replacement of breakers in the 1970s through the fuel needs of the present day.

Industrial Use: Mining process are used crushers, generally classified by the degree to which they climb the starting material, with primary and secondary crushers use coarse materials, tertian and quaternary crushers decrease or molecules to finer classifications. As well rock breakers are typically placed next to a crusher to reduce big size material too large for a crusher. A typical processing line at a mine might consist of a crusher followed by a SAG mill and by a ball mill.

Types of Crushers

• Jaw Crushers
• Cone Crushers
• Compound Crushers
• Mobile Crushers
• Crushers Buckets
• Gyratory Crushers
• Mineral Sizers
• Horizontal Shaft Impactors
• Impact Crusher